Stainless steel commonly used cold forming method(1) rubber liner molding using rubber liner molding technology can significantly reduce the mold processing costs, can be used to produce small quantities of products. The molding mechanism used in this technique is made of a material that is not costly, for example, with a hardwood or reinforced epoxy resin for a male mold, and a rubber pad is used to make a female mold. The rubber may be a solid rubber block, or it may be a layered rubber block having a depth about 30% higher than the forming mechanism.[url=http://scrapsteelexports.com/]scrap steel exports,scrap steel prices[/url]When the molding mechanism is closed, the rubber block is extruded into the stainless steel blank, and when the molding machine is lifted, the rubber pad is restored and the rubber gasket can be used repeatedly. The process characteristics of rubber liner molding determine the product that can not be used to produce complex shapes, and the maximum depth of the parts produced is limited, and this process is often used to produce small batches of stainless steel parts with a thickness of less than 1.5 mm.[url=http://scrapsteelexports.com/steel-exports/]stainless steel sheet exports[/url](2) Folding forming Flap machine as a simple bending machine, either manual or mobile. The easiest way is to secure the steel plate firmly on the machine table with a model with a bending radius. The protruding part is placed on the other table, which can be rotated along the center of the bending radius. When the active table rises, it bend the stainless steel to the desired angle, and it is clear that the stainless steel slides on the table when it is bent.[url=http://stainlesssteelcoilprice.com/steel-products/5617.html]Отличная Конструкция Круглой Трубы Из Нержавеющей Стали[/url]Therefore, to prevent scratching stainless steel, the table surface must be smooth. In the actual processing, usually with plastic film to protect the stainless steel surface. The upper beam is usually wedged to form a gap so that it can be folded into a quadrilateral box or groove with a suitably shaped blank. Flap machines have been used to produce large-sized stainless steel sheet products that are simple in shape, but these products are now produced with cold-formed presses.[url=http://stripstainlesssteel.com/]Stainless steel strip[/url]